Automated Machine Technologies, Inc.
Automated Machine Technologies, Inc. is a manufacturer of aseptic liquid filling and capping machines, plugging, crimping, sterile vial stoppering monoblock machine, e-cigarettes automatic cartomizer filling machine, inline liquid filler, plugger, crimper capper machinery and equipment, sterile vial monoblocks, fillers, pluggers and cappers for pharmaceutical, cosmetic and food packaging. e-Cigarettes cartomizers filling VG PG glycol solutions, Micro-Liter dispensing filling and verification of 96-well and 384-well Microplate Dispenser with digitally compensated servo controlled peristaltic pump and automatic verification, P&A Labeling.
I have been working with AMT™ for two years now and
there have been no problems to report.
We run so many products on the AMT™ Monoblock machine for the last couple of years. We do mostly liquid filling and screw capping, but
sometimes filling and stoppering with full or partial insertion. We could also do filling,
stoppering, and capping at the same time. Often we do changeover twice a day. During my 20
years of experience I have worked with many different liquid packaging systems, and I have not
seen such a flexible machine before. This machine is so simple to operate, but it is very versatile,
it can be easily set up for hundreds of different products. Adjustments are done by the computer
via servo mechanisms, by calling a part number from the touch screen. Change parts like star-wheel
for bottle index and track for screw caps or capping chuck are easily replaced without using any
tools. I can set up the machine in minutes for any of the bottles in our range, from single milliliters
up to 500 ml, and I can walk out of the production room, the machine will run production for me.
I can even set up to reliably run PP bottles with PP screw caps, which have a tendency to jam,
and we were trying them in the past on many different machines without much success. The
peristaltic tubing is easily accessible outside of the machine. Tubing and nozzles are usually
disposable, sometimes we sterilize the tubing. Filler is maintaining consistent fills,
and I make volume adjustments only occasionally by touching the touch screen, without stopping
the production. The screw capping servo torquer is so precise and consistent that we do not even
have to check the torque any more. This is one of the best machines that I worked with and the
only machine that can run so many different products, and surprisingly, it has a very small footprint.
I am in this production room for the last two weeks, and I see that these two AMT™ machines are running great.
I had the good fortune to work with AMT™ on a project related to my duties
as Director of Product Development at Vesture Corporation. We were tasked
with the innovation of an analog thermostat to control our Quick Heat
product for the food service industry. In field trials of the control
provided by AMT™ it was the only device which to date in over 2 years of
continuous commercial use has never failed to provide accurate control
on our commercial product. We consider our relationship with AMT™ to be one
of our greatest assets to our product development mission.
Our selection of the AMT™ Peristaltic Filler was driven
by the demanding volume specifications on our liquid
products. The fill tolerances ultimately achieved on
the 5 ml to 30 ml packages exceeded my expectations.
AMT's willingness and ability to build and
configure a custom machine in a very short time frame
and the troubleshooting support through the
startup/debugging process is noteworthy. I am extremely
satisfied with the equipment and service I received from
Copyright © 2008
Automated Machine Technologies, Inc.
10404 Chapel Hill Road, Unit 100, PO Box 1186, Morrisville NC 27560-1186
Email: Office@AMTLiquidFilling.com Phone: (919) 361 0121 FAX: (919) 481 2120